Pages Menu

Posted by on Jan 28, 2016 in Uncategorized |

Improving Treatment of Your Household Wastewater to Reduce Contamination

Having a wastewater disposal system in your home is important. However, with such systems, your household wastewater should be properly managed as well. This is because the wastewater may contain contaminants that can degrade the quality of water for uses like drinking, food preparation, and watering of livestock. Some of the potential contaminants in your household wastewater include infectious viruses, excess nutrients like nitrates, and disease-causing bacteria. Properly installed and maintained systems for the treatment and disposal of household wastewater will reduce the impact of the system on surface and ground water. Therefore, here are ways of effectively handling your household wastewater. 

Volume

Minimizing the volume of household wastewater that enters your treatment system is an effective strategy. This is because less volume improves the treatment by reducing the number of times you have to empty your holding tank. This means that waste will spend more time in the system, increasing the time for settling, aeration, decomposition, and soil contact. To reduce the volume of wastewater, you will have to minimize water use.

You can do in many ways. For instance, eliminate the non-functional uses like flushing your toilets to dispose of waste, such as tissue, which can be disposed like solid waste. You can also turn off the water between uses and fix any plumbing leaks. More importantly, create awareness in your family on how to reduce water use.

Quality

Domestic wastewater often contains some amounts of contaminants. This amount can be relatively small, but has a huge impact on the usefulness of the water in your home. Therefore, to ensure that you are improving the quality of your wastewater, try the following:

  • If you have a garbage disposal unit, minimize its use because they deposit large amounts of organic matter and suspended solids into your septic system. Moreover, they use additional water, and since you want to minimize water use, this won’t be so good.
  • Don’t push disposable diapers, paper towels, tampons or grease down the drains of your septic tank because such materials can clog the system and affect its performance.
  • Avoid putting toxic substances in the drain of your septic tank because they will end up in the ground water. Such substances include solvents, acids, degreasers, and the like.

Collection

Collect all the waste that should be treated to minimize the escape of untreated waste. Leaking treatment pipes or tanks can allow the wastewater to return to your water supply system without being treated adequately. Moreover, don’t let rainwater or water from your roof drainage to add to the volume of your wastewater. Instead, divert the clean water away from your house.

For further assistance, contact local professionals, such as those from Multiple Trades & Maintenance.

Read More

Posted by on Jan 22, 2016 in Uncategorized |

Clogged Central Vacuum System? 3 Areas to Look

Having a central vacuum cleaner or system in your home is convenient because of its many advantages. With this system, you can quickly clean up messes whenever they occur. Nonetheless, despite being essential, central vacuum systems are prone to clogs. The good news is that you can actually take care of this problem by yourself. The bad news is that if you don’t even know how to locate the clog in the first place, you will find yourself seeking the local central vacuum cleaning and repair services every time your system develops this problem. Therefore, to make sure that this doesn’t happen, here are 3 important areas to look at:

Filter/Bag Clogs

If your motor unit hasn’t been maintained well or if you vacuumed fine particles recently, the filter or bag of the unit can be clogged. Since locating the clog is the first thing you will have to do, it is important to look out for the signs that your system is clogged. For this reason, the clearest indicator is often low or no suction at all. If the filter or bag of your motor unit were clogged, you would observe low suction from each inlet, including the one on your motor unit itself. To take care of this problem, you need to replace the filter (for bagless units) and the bag (for bagged units).

Hose Clogs

If your motor unit is not clogged and you are still experiencing low suctions at every inlet, your hose could be the issue. The easiest way to do this is by running a ball bearing or marble through the hose to observe whether it will pass all the way through. If it doesn’t, you can clear the hose by running a plumber’s snake or a stiff wire through it. Alternatively, you can fit the hose into the inlet valve of your built in vacuum in reverse and let the system clear out the clog. Nonetheless, this may not be a good idea since you can easily transfer the clog into your central vacuum system.

Piping/Inlet Clogs

If just one inlet valve is not receiving suction and there are others, check them as well to help you isolate the clog’s location. To do this, you can place a facial tissue in front of every valve and open the valve for the tissue to be sucked in. You can then check your trash receptacle to identify whether the tissue made it down, and if it did, move to the next valve.

To take care of these clogs, you can tightly fit the hose of another vacuum cleaner to the clogged inlet valve with your built in system turned off. This will hopefully suck out the clog. You can loosen the clog by switching the other vacuum cleaner on and off.  

Read More

Posted by on Jan 15, 2016 in Uncategorized |

Types of underpinning for foundations

If the foundation of your home can no longer provide support, you may be required to carry out underpinning. In construction or renovation, it is the process of strengthening the foundation of an existing building. A building may require underpinning for a number of reasons which include the following:

  • The original foundation is faulty or not stable enough.
  • Weight, such as an extra storey, is being added on to the structure
  • A change in the properties of the soil surrounding the foundation
  • Construction of nearby structures that requires soil around existing structures to be excavated.
  • To increase the depth of existing foundations
  • Movement of the foundation as a result of earthquakes, floods or other natural causes
  • Soil subsidence which has caused the foundation to sink.

Available underpinning methods

The reason why your foundation requires underpinning is an important indicator of the method to use. And while underpinning services are carried out by specialists, having some little knowledge will help you make the right decision when you receive quotations from structural and geotechnical engineers The methods available for strengthening your foundation may, among others, include the following.

Beam and base underpinning

This is a more technically advanced variation of concrete underpinning that involves construction of a reinforced concrete beam either below or above an existing one, or in replacement of the existing footing. Mass concrete bases are then constructed strategically and the weight of the building transferred on to them by the reinforced beam.

Mass Concrete Underpinning

Concrete underpinning increases the mass of the foundation to strengthen it. Extensive excavation is done around or under and then concrete is poured strategically. The method is applied where the existing foundation lies at a shallow depth. It is a simple and cheap method that does not require use of heavy machinery though it can be a slow process. Also, the building can still be used while renovations are being done.

Expanding resin injection underpinning

This underpinning method is fast, least invasive and does not involve excavation. A mixture of hardener and resin is injected into the ground. The mixture expands and fills any spaces or cracks and also compacts loose soil. The process may even raise sunken parts of a building. Resin injection is a simpler and less expensive method.

Underpinning costs

Whatever method you choose to use will have varying costs depending on a number of factors, which include the following:

  • Location of the building
  • The type of footings in the foundation
  • Soil type
  • Accessibility of the foundation
  • Amount of materials required
Read More

Posted by on Jan 6, 2016 in Uncategorized |

Never Try to Handle These Jobs Without the Help of an Electrician

Many homeowners assume they can handle a number of renovation, construction, and remodeling jobs on their own, without the help of certain professionals. It’s true that online videos and other tutorials can go a long way toward teaching you how to install floor tiles, a new sink, and so on, but there are still many jobs that you don’t want to handle yourself. Jobs that involve electricity can be especially dangerous to do on your own; note a few of those jobs here so you know when to call an electrician to assist.

1. Installing a hot tub

Installing a hot tub on your back deck or other such area means much more work than simply setting it up and plugging it into a wall outlet. The heater and jets of the tub will demand quite a bit of electrical power, so chances are it should be wired to its own circuit. You also want to ensure that electrical cords, outlets, and other such components are safely covered or otherwise protected when near any type of water fixture, including a hot tub. Don’t assume you can just handle this installation on your own, but have an electrician check the wiring and all other electrical components for you.

2. Putting in a new home theater or entertainment system

You may not think that televisions, DVD players, gaming systems, and such components will be a drain on your home’s electrical systems, but these pieces do require quite a bit of power to run. This is especially true if you have many of them working at the same time; if you have the gaming system plugged into a large television and the stereo system, you’re demanding quite a bit of electrical power. Trying to do this with older wiring can overload those wires and, in turn, cause them to become frayed and bare. When you’re ready to install a new home theater or even an upgraded entertainment system, have an electrician check the amps needed for those pieces and if your home’s wiring can support those demands.

3. Removing old wiring

It’s easy to think that you can simply remove old wiring by disconnecting it from its circuit and then closing up the wall around it, but this can be a mistake. If you don’t properly cap off those electrical wires, this can allow electricity to still circulate and, in turn, potentially char and burn the building materials around it. Before you remove any old wiring, call an electrician to ensure it’s done properly.

For more information, contact a local electric services company like All Electrical Work

Read More